Temperature and Humidity Walk-in Stability Test Room

Discover our Temperature and Humidity Walk-in Stability Test Room for precise environmental testing. We are a leading factory with high-quality products.
Request a Quote

PRODUCTS DETAILS

Basic Info.

Model NO.
XB-OTS-K-A
Material
SUS# 304 Stainless Steel
Cooling System
Air Watercooling/Double Segment Compressor
Temperature Rising
Approximately 5.0 C/Minute
Transport Package
Strong Wooden Case
Specification
250*140*220cm(W*H*D)
Trademark
OTS
Origin
China
HS Code
9032899090
Production Capacity
248 Sets Per Month

Product Description

Temperature and Humidity Walk-in Stability Test Room
Application :


   OTS Walk-In Chamber serves as a test site for large components, assemblies, and finished products in electrical and electronics, aerospace, batteries and automobiles, etc
   OTS manufactures both Static Walk-In Chambers and Dynamic Walk-In Chambers and can be configured as a temperature chamber or a temperature humidity chamber.

   OTS-Series walk-in temperature and climate test chambers are especially developed for large test specimens. Size and design are optimal loading of test specimens. The modular construction and variability in size and equipment is ideally forspecific application.

Specification :
Specification of Walk-In Chambers 
Model   XB-OTS-10m2B-B
 
Volume(m3) 12m3
Interior Dimensions W3000*H2000*D2000mm
Exterior Dimensions W3750*H2200*D2550mm
Safety Devices(standard) No fuse breaker, over pressure,over heat and over current protection for compressor,over temperature protection, over load protection for blower, dry heat protection
Standard accessories Sight window*1,cable port(port Φ50mm)*1,chamber lamp*1, status indicator
Control System Balanced Temperature & Humidity Control System
 
Refrigeration system
Water Cooled
Semi-hermetic compressor, single stage or cascade refrigeration system,
CFC free refrigerant(HFC-507 and HFC-23)
 
 
 
Controller
Panel 7-inch LCD Touch panel,Chinese or English display selectable
Operation model Program or fix point running
Memory capacity 120 programs,1200steps, all repeat 999 cycles,part repeat 99 cycles
Accuracy Temp.:0.1% of F.S±1 digit  Humidity:0.1% of F.S±1 digit
Input Temp.:pt-100, Humidity:pt-100 or ~5V DCV
Comm.port RS-232 or USB (Softawre is option)
Temp. range Maximum:80 ºC,150 ºC;Minimum:-60 ºC,-50 ºC,-40 ºC,-30 ºC,-20 ºC,-10 ºC,0 ºC
Humidity Range 10%~98%
Temp. constancy ±0.5 ºC
Humidity constancy ±2.5%R.H
Temp. uniformity ±2.0 ºC
Humidity uniformity ±5.0%R.H
Ambient Temp. +5 ºC~+35 ºC
Wiring method AC 380±10% 50Hz ,3 phase 4 wires +Ground Wires
Heat up time +20 ºC~+80 ºC,Within 60 min
Pull down time +20 ºC~-55 ºC, -40 ºC,-20 ºC,-10 ºC,Within 120 or 90 or 60  min
Interior material Stainless Steel Plate(SUS 304)
Exterior material Baked Painting Steel Or Stainless steel(SUS304)
Insulation material Rigid polyurethane foam
Door size (mm) Single wing:W800*H1800; Double wing:W1600*H1800;
Note:1. We reserve the right to change specifications without prior notice   2.Customized sizes and configurations available

Control method and characteristics:
    Precision microcomputer control temperature and humidity system, with PID control the refrigerant flow to make the system's heating / humidification reduction, to achieve low power consumption, energy saving, carbon reduction effect, cooling, heating, humidity control intelligent electronic control, long-term stable use.
 
Optional accessories
1 Cable Port: Two size of cable port is available: Φ50mm, Φ100mm.
2 Double door
3 Pass room: Provided to avoid disturbance of atmospheric temperature and humidity while opening the door.
4 Floor reinforcement: Can be fixed if heavy specimen placed in the chamber for test.
5 Carry-in inclined platform: Provided below the door to facilitate moving of specimens in and out through the door.
6 Entire ceiling blow-out duct
7 The extremely wide air inlet reduces the airflow rate (down to apprrox.0.5m/s)
8 Dehumidifier
9 The rotation regenerating dehumidifier (M-300)ensures precise control of low humidity (21 C,23%RH)for electrostatic reliability tests.
10 Temperature and humidity recorder
11 100mm width recording paper with 6 dots
12 180mm width recording paper with 12 dots
13 Status indication lamp
14  Provide to signal chamber status and warnings when normal running, a malfunction running or stand by occurs.
15 Water purifier
16 Provided to keep the humidifier heater free from scale and ensure the supply of water to humidifier.
17 Power socket

Standard Met and Implemented:

GB/Bb T2423.2-89 high temperature test method
GB2423.1-89 test A: low temperature test method 6
GJB150.4-1986 test at low temperature
IEC60068-2-1 low temperature test method
IEC60068-2-38 temperature cycle
IEC60068-2-78 constant humidity temperature
 
Your company has just developed a great new product, 
and now it is your job to select a better environmental test 
chamber to test it and make sure it will hold up, and to decrease your lost.
 
OTS has business on reliability test equipment for more than 30years.
OTS  is widely recognized and recommended by the top 1000 comopanies and also customers from electronic, computer, home appliance, communications, chemical industry and scientific reseach.


FEATURES:

1.Realize temperature constant value control and program control;
2.The entire data recorder function (optional),which for record and retrospect,Protect/heater for short circuit protection, ensure the stability of air volume and heating during the operation.
3.With USB connector and WAN communication function,makes the communication equipment and software extensions to meet customers' needs.
4.Adopt international popular refrigeration control mode, can automatically adjust the compressor refrigeration power of 0% ~ 100%, compared with the traditional thermal equilibrium temperature control mode and energy consumption reduced by 30%.
5.Refrigeration and electric control the key parts adopt international famous brand, make the whole of the equipment has improved the quality and guarantee.
6.Customize size/customize indicators/customize various optional features



Temperature and Humidity Walk-in Stability Test Room
 

 


Temperature and Humidity Walk-in Stability Test Room

Temperature and Humidity Walk-in Stability Test Room
Temperature and Humidity Walk-in Stability Test Room
Temperature and Humidity Walk-in Stability Test RoomTemperature and Humidity Walk-in Stability Test Room

1. Are you Manufacturer?Do you offer after-sales service? How can I ask for that? And how about the warranty?

Yes, we are one of professional and biggest Manufacturer of Hot Sale Drying Oven For Laboratory,Hot

Air Circulating Oven,High Temperature Oven .Every machine from our factory has a 14-month warranty

after shipment. Generally,we offer 12 months for the FREE maintenance, while considering of sea

transportation,we can extend 2 months for our customers.

If your machine doesn't work, you can send E-mail to us and we will try our best to find

the problem by email or skype video chat if neccesary. After confirmation of the problem,

we can send you new spare parts or provide on-site repair.

2. What's the delivery term?

At most of time, we have stock in the factory. If there is no stock, normally, the delivery 

time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider 

making a special arrangement for you.

3. Do you accept customization service? Can I have my logo on the machine?

Yes, of course. We can not only offer standard machines, but also customized 

machines according to your requirements. And we can also put your logo on the machine.

4. Do you have a branch company or service office in my country?

We have offices in the belowing:

The US Office: XIN BAO INSTRUMENT (US) CO.,LTD

 

Vietnam: XIN BAO INSTRUMENT INDUSTRY(VIETNAM)CO.,LTD

 

Address:248 no.1A Road,An Lac-Binh Tri Dong Residence,B Ward, Binh Tan Disrtict, HO Chi Minh City, Vietnam.

Singapore Dealer: Surveillance Inspection & Testing Services Pte Ltd

 

Address:No. 5 Jalan Kilang Barat #08-06 Petro Centre Singapore, 159349

Italy Dealer :AMSE SRL

 

Address: Strada della Cebrosa 86, 10156 Torino Italy

Suzhou Branch: XIN BAO INSTRUMENT SUZHOU BRANCH

 

Address: The First Garden B5 Buildings,Wuzhong Road 2588,Wuzhong District, Suzhou City Jiangsu Province

 Nanjing Branch: XIN BAO INSTRUMENT NANJING BRANCH

 

Address: Room 539, Excellence Building, 688 Zhujiang Road, Xuanwu District, Nanjing City, Jiangsu Province

Taizhou Branch: XIN BAO INSTRUMENT TAIZHOU BRANCH

 

Address: No.68, Gaoyuan District, Jiaojiang District, Taizhou City, Zhejiang Province

Taiwan : TAIWAN XIN BAO INSTRUMENT CO.,LTD

 

Address: No. 551-1, 4, Central Road, Taichung City, Taiwan

5. How to install and use the product?

We will send you operating instructions, English  video by Email. Or you can download on our

officail website directly.

Most of our machine is shipped with a whole part, which means it is already installed, all you

need to do is to connect the power cable and start to use.  And if possible, we can also install

your machine at site.
Temperature and Humidity Walk-in Stability Test Room

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours